Parts

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No

Box One™ fork adapters let you run standard "Male" 10mm (3/8" axles) in a fork designed for 20mm axles. - Material 6061-T6 Aluminum

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model stem we’ve tailored the Oversized strategy to favor utility and access. The geometry has been altered to allow for easy handlebar removal while at the same time scavenging material from low stress zones. Ideal for those who don’t want to compromise on user experience to gain performance. These stems are engineered for the larger-sized racers.

The Box Three E-Bike Cassette offers high gears with more teeth to withstand the rigors of modern E-Bike riding. Adding an extra tooth to each of the three highest gears provides increased durability and decreased wear by distributing the load over a larger area! The Box Three E-bike cassette draws from both of its Box One and Box Two siblings to create a sensible all-rounder. All cogs are stamped from steel and subsequently, the larger ones are pinned to steel spiders. The main difference here versus Box Two is the use of additional weight-reducing holes on the cogs. FEATURES - Our Best All-Rounder Cassette - Steel Stamped Cogs - Steel Stamped Spiders - Ultra-Wide Ratio with Consistent Progression COMPATIBILITY - Box One Prime 9 Chain 126L DLC Black - Box Two Prime 9 126 Link Chain Nickel - Box Three Prime 9 126 Link Chain Polished - Box One Prime 9 Rear Derailleur - Box Two Prime 9 X-Wide Rear Derailleur Black - Box Three Prime 9 X-Wide Rear Derailleur Black - Box One Prime 9 Single Shifter Black - Box Two Prime 9 Single Shifter Black - Box Three Prime 9 Single Shifter Black

- Bottom bracket for one-piece crank - Sealed mechanism - 24 TPI - Spindle Type: One piece - Cup Material: Steel - Weight: 310-315g - Cup Type: Press Fit - Cup OD/Bearing OD: 51mm

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Nylo-Comp Pedals feature a one-piece resin body, molded pin design, and chromoly spindle. - Loose ball bearings - 375g/pair

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

- Embossed carbon-look weave pattern and self-adhesive backing - Includes carbon look, black plastic end plugs and finishing strips

- Special Micro-cellular structured tape material with perforations for breathability, comfort, and less weight - High Elastic modulus Provides vibration-damping and comfort - White printed logo throughout tape length and self-adhesive backing - Plastic end plugs and finishing strips included

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation

A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep

Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise

Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch

Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center

Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes. - A must-have in any bicycle service department - One-piece design - Shimano index compatible - Works with most friction shifters - Suitable for use with e-bike drivetrains

A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

ABI Headset Bearing for new builds or replacements.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

ABI Headset Bearing for new builds or replacements.

The GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones – matched to the shape of the hand – increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulna nerve stress and decreased arm pump. The inboard aluminum clamp allows even more grip area at the end of the bars. The gripset is lock-on and carbon bar friendly. - Uses: mountain bike, all-mountain, freeride, dirt - Clamp: aluminium, black anodized

The GA3 Single Twist-Shift is designed for 1x twist shift set-ups like SRAM XX1 and Pinion. The fully integrated, rubber enclosed lock-on clamp (collar) on the outside of the grip provides plenty of space for a wide grip stance. This concept combines the relief benefits and wrist support of an ergonomic wing grip with the freedom of movement of rounder style grips. With DNA from our popular GA2, the GA3 offers optimized shapes and advanced surface textures to reduce gripping forces. The super soft, UV-stable rubber compound is exclusively manufactured for Ergon in Germany and allows greater grip, delivering more control on demanding terrain. Rubber covered outer clamps offer an even wider grip position for generous space. The end plug is replaceable. Compatible with carbon handlebars.

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float

Pedal built with quality materials. It features a strong, aluminum body, and a Cr-Mo axle on a slimline dual bearing system. - LSL bushing & sealed bearings - Tension gauge - Aluminum Body with CNC-Machined chromoly spindle - Includes E-RSL1 SPD-SL Style Cleats and mounting hardware

FSA ACR (Aerodynamic Cable Routing) Headsets are suitable for both road and MTB riding styles and feature angular contact bearings. - A fully integrated cable routing - No rotation limit - ACR top cover - Angular contact bearing - Specific frame required - 1.5" headtube - 36°/45° ACB - For 55.8mm OD headtube - For 1-1/8" to 1.5" tapered fork - Stack height 10.4+0.5=10.9

FSA Standard Headset Bearings

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

FSA PowerPro JIS Cartridge Bottom Brackets. - Includes bolts - Spindle Interface Type: Square Taper JIS - BB Shell Width (mm): 68 - BB/Frame Interface: English

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)

FSA’s quiet, efficient, and durable chain. Team Issue chains are nickel plated and chamfered to enhance shifting performance. - Tool-free connector link included - 6.4mm width - Weight: 275g

The lightweight Orbit UF uses a mixture of bearing types, with caged ball bearings in the top race and sealed cartridge angular contact bearings in the bottom race. Upper and lower water seals keep the elements at bay. - Forged and CNC machined 6061/T6 Aluminum cups - Patented alignment tip for increased durability and performance - Upper cup uses double sealed 5/32" ball bearings - Lower cup uses a black seal angular contact bearing - Laser etched aluminum top cap - Weight: 99g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap - Weight: 89g

Fi'zi:k's line of Vento tapes are race bred for ultimate control and reduced weight. Microtex is the thinnest option for pin-sharping handling and control. Its tacky finish aids a sticky nonslip surface with a raised texture for ultimate grip in every condition. - Microtex construction 2mm thick - Tacky touch