Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift all of gears at once. These shifters are indexed to shift three front chainrings, and feature micro-adjustments to keep derailleur alignment perfect.

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

You love your bike and you want to protect its beauty! The official Ritchey Frame Protection Stickers are here to defend your precious whip from cable rub, shoe scuffs and other damaging wear. Cover every possible contact point with 17 durable stickers of various sizes and shapes. Some of these clear stickers have the Ritchey logo, some of them don't. Stick them on the frame and ride without worry! - Heavy-duty and durable plastic stickers - 17 individual pieces per sheet - 5 shapes and sizes

- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Compression plug for Wolf Tooth headsets. - Compression plug works with steerer tube inner diameters ranging from 23.2mm to 24.2mm

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

Traditional EVA tape looks great on the bike and feels comfortable on the hands no matter how long the ride. EVA tape is flexible and comes with an adhesive backing so it wraps well and stays put during and after installation. - EVA vibration-damping foam increases grip and comfort - Adhesive backing for perfect bar placement - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These legendary M26 rear derailleurs put cyclists of all ages back on their saddles with as little frustration as possible. - Robust composite and steel construction - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

Problem Solvers Singlespeed 6-bolt Cogs are designed to be used with the Problem Solvers Cog Carrier. - Compatible with 3/32" and 1/8" chains - Cog is also 6-bolt rotor mount compatible for fixed gear use (see instructions for applicable warnings)

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

The extra material on MSW's EFG-100 grips isn't for good looks: it's to spread the pressure across more of your hand, resulting in less stress and fatigue. • Comfortable, ergonomic shape • Reduces hand fatigue while riding • Thermoplastic rubber

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad Material: Steel - Compound: Semi-Metallic - Compatibility: Tektro IOX, Lyra, Novella Post 2010

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Adapters to convert your flat mount frame or fork to post mount. - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No

The Z8 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Designed for use with internally geared hubs - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Suitable for MTB, road, and comfort riding - 1/2 x 3/32"

RockShox 32mm Seal Kit

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Changing gears is a snap with the Acolyte shifter. Discrete thumb and index levers and a crystal clear gear indicator simplify shifting decisions, making each action and reaction easy to understand. And, of course, it retains the light action and positive indexing that microSHIFT has made its name on. - Ergonomic trigger placement - Clear and easy to read indicator

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate - Compatible with SRAM Code RSC (A1), Code R (B1), Guide RE; Avid Code (2011-2016)

The Shimano EF500 8-Speed dual brake/shift lever features reach adjust technology and an optical gear display. - Equipped with a reach adjust mechanism that allows for the distance from handlebar to lever to be adjusted in order to suit any hand size and riding preference - The optical gear display tells you which gear position is selected while riding - Compatible with V-Brake, Mechanical disc brake (MTB)

For reliable mountain bike shifting, Shimano's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke. - Slim main lever body - OPTISLICK for smooth shifting performance - Gear display positioned below the handlebar - Numbered gear display indicates gear position at a glance - Light shifting operation, wider compatibility, and suitable for internal cable routing - Streamlined cockpit experience

Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability. - Compatible with Shimano Deore XT M8020, Saint M810 and M820, and Zee M640 - Compatible with TRP Quadiem, G-Spec Quadiem, Slate T4, and G-Spec Slate

- A chain designed for BMX but is at home on any single speed bike needing a chain built to last. - Nickel plated outer plates and black inner plates provide rust and abrasion resistance - Links (links): 112 - Color: Silver/Black - Width: 9.3mm - Chain Connection Type: Single Use Master Link - Half Link Chain: No

Steel backed disc brake pad with and organic compound. - Fits Zoom Disc Brakes - Steel Back w/ Organic Compound - Qty 1 = enough for 1 wheel