Parts

- Embossed carbon-look weave pattern and self-adhesive backing - Includes carbon look, black plastic end plugs and finishing strips

A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

ABI Headset Bearing for new builds or replacements.

FSA ACR (Aerodynamic Cable Routing) Headsets are suitable for both road and MTB riding styles and feature angular contact bearings. - A fully integrated cable routing - No rotation limit - ACR top cover - Angular contact bearing - Specific frame required - 1.5" headtube - 36°/45° ACB - For 55.8mm OD headtube - For 1-1/8" to 1.5" tapered fork - Stack height 10.4+0.5=10.9

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- 1/2" x 11/128" - 116 Links - TI (Titanium Nitride Coating Gold) - 10 speed - Compatible with Shimano, Sram & Campagnolo 10 Speed Systems - Mushroomed Pin Riveted - 273 grams

- X8.99: stretchproof, chamfered plate, full-nickel plated chain for 5-8 speed and great for internal geared hubs - Z72: chamfered inner plates with Bulls-eye rivets for 5-8 speed - Z51: standard bushingless, chamfered plate chain for 5-8 speed - Z30: economy bushingless chain for 5-8 speed - Width = 3/32-inch

MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal. - PU material with anti-slip coating improves grip over traditional cork material - Gel backing provides vibration damping and extra comfort - Silicone adhesive for easy install and clean removal - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood). UPGRADED TRAVEL PLANS By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy. UNDER PRESSURE Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge. MAKE IT YOURS The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.

The Puget lever kits are compatible with all of our droppers, including the Cascade, Pine, Rainier, Bachelor, and Coast. These levers use a barrel nut for securing the cable and is universal with all mechanically actuated droppers from other brands. This kit includes the lever assembly, cables, housing, and barrel nut. - 2x lever - Works on mountain bikes with all drivetrains, but is designed to play nice with front shifters

Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

- Replacement clamp for Link seatposts - For standard rail saddles

Complete clamp kit to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt alloy seatpost - Material: 7050 alloy, stainless steel bolt

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.

The SRAM Rival 22 Mechanical Shifters are modeled after the phenomenal RED shifters. SRAM not only trickled down 11-speed compatibility, but ErgoFit elements such as a slightly longer brake lever to enhance control, independent reach adjustment for brake and shift levers, and a smaller diameter hood with a taller top shape to increase rider control and improve finger wrap. Because you're able to shift from the hoods, drops, and even when sprinting, the Rival levers offer a competitive advantage that can't be touched. The single-lever-shifting design allows for faster, smoother shifts while being completely independent of the brake levers, eliminating the possibility of engaging the brakes when you shift. Plus, the forged aluminum brake lever and shift paddle offer a beautiful balance of low weight and impressive durability.

SRAM's Rival 22 Front Derailleur delivers precision shifting with YAW technology. The steel cage with aluminum links ensures strength and durability. • Yaw cage rotates in line with chain, improving the shifting speed and precision while eliminating the need for shifter trim • Integrated chain spotter protects your frame, installs and adjusts independently of the derailleur itself • Precision alignment markings on the cage • Clamp: braze-on • Weight: 89g with Chain Spotter

SRAM's Rival 22 Brake Caliper Set delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brakes offer excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick-release and adjustment barrel.

Incredibly fast, astonishingly quiet, and impressively precise—fly through all 11 gears with SRAM's Rival 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. Aluminum inner and outer cages, aluminum links, and stainless steel hardware keep the durable Rival 22 at a svelte 180 grams.

• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

The Shimano Ultegra R8025 shifters bring greater rider control in all conditions thanks to Shimano's category-leading hydraulic disc brakes. Lighter front shift action and a refined ergonomic shape sweeten the deal. - Smaller lever size and new positioning improves ergonomics - Dedicated lever control for riders with smaller hands - Redesigned internal shifting unit - Greater control in all conditions for riders with smaller hands - Quick and intuitive rear shifting operation - Same light shifting operation as Ultegra R8000

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale BB30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 42mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 73mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16 notch - Weight: 156g